Jubilee clip size 6: 6 (110 to 140 mm OD). Where it is used, its real published dimensions, and the fittings that connect it to other hose, tap and irrigation systems.
Updated 05 September 2026.
Jubilee clip size 6 (6 (110 to 140 mm OD))
Where 6 (110 to 140 mm OD) is used, its real dimensions, and how to connect it.
Used on: clamping hose in the 110 to 140 mm outer-diameter band.
A Jubilee size 6 clamps a hose of 110 to 140 mm outside diameter. Measure the hose once it is pushed onto its barb or spigot, because it swells slightly, and pick the size where your reading sits mid-range rather than at the very end of the band.
Quick-connect click fittings from Hozelock, Gardena and Karcher are proprietary and do not interchange. They all sit on top of a standard thread underneath, so the reliable way to move between brands is to adapt at the threaded tap or hose-end fitting, then use each brand's own connector above it.
Connect this fitting
Questions and answers
What is the clamping range of the Jubilee clip size 6 (6 (110 to 140 mm OD))?
110 to 140 mm hose outer diameter
What is the band width of the Jubilee clip size 6 (6 (110 to 140 mm OD))?
worm-drive continuously threaded band
What is the type of the Jubilee clip size 6 (6 (110 to 140 mm OD))?
Jubilee Original worm-drive hose clip
What is the sizing rule of the Jubilee clip size 6 (6 (110 to 140 mm OD))?
measure hose OD on the spigot, aim for mid-range