HoseFitFinder

Jubilee clip size 1X (1X (25 to 35 mm OD))

Where 1X (25 to 35 mm OD) is used, its real dimensions, and how to connect it.

1X (25 to 35 mm OD)Thread standard
Clamping range25 to 35 mm hose outer diameter
Suits25 mm bore pond hose on its hosetail
Typeworm-drive, continuously threaded band
Sizing rulemeasure OD on the spigot, aim mid-range

Used on: clamping 25 mm pond and pump hose over a hosetail in the 25 to 35 mm band.

A Jubilee size 1X clamps 25 to 35 mm outside diameter, the usual choice for 25 mm pond hose once it is on a hosetail. If your measured outside diameter is near the very top of a size, step up rather than run the clip out to its last thread.

Quick-connect click fittings from Hozelock, Gardena and Karcher are proprietary and do not interchange. They all sit on top of a standard thread underneath, so the reliable way to move between brands is to adapt at the threaded tap or hose-end fitting, then use each brand's own connector above it.

Connect this fitting

Sources: Jubilee Original hose clip size chart (clamping OD ranges in mm), Jubilee Clips · Jubilee clip sizes and how to size by hose OD, The Hosemaster