Jubilee clip size 3X: 3X (60 to 80 mm OD). Where it is used, its real published dimensions, and the fittings that connect it to other hose, tap and irrigation systems.

Updated 05 September 2026.

Jubilee clip size 3X (3X (60 to 80 mm OD))

Where 3X (60 to 80 mm OD) is used, its real dimensions, and how to connect it.

3X (60 to 80 mm OD)Thread standard
Clamping range60 to 80 mm hose outer diameter
Band widthworm-drive continuously threaded band
TypeJubilee Original worm-drive hose clip
Sizing rulemeasure hose OD on the spigot, aim for mid-range

Used on: clamping hose in the 60 to 80 mm outer-diameter band.

A Jubilee size 3X clamps a hose of 60 to 80 mm outside diameter. Measure the hose once it is pushed onto its barb or spigot, because it swells slightly, and pick the size where your reading sits mid-range rather than at the very end of the band.

Quick-connect click fittings from Hozelock, Gardena and Karcher are proprietary and do not interchange. They all sit on top of a standard thread underneath, so the reliable way to move between brands is to adapt at the threaded tap or hose-end fitting, then use each brand's own connector above it.

Connect this fitting

Questions and answers

What is the clamping range of the Jubilee clip size 3X (3X (60 to 80 mm OD))?

60 to 80 mm hose outer diameter

What is the band width of the Jubilee clip size 3X (3X (60 to 80 mm OD))?

worm-drive continuously threaded band

What is the type of the Jubilee clip size 3X (3X (60 to 80 mm OD))?

Jubilee Original worm-drive hose clip

What is the sizing rule of the Jubilee clip size 3X (3X (60 to 80 mm OD))?

measure hose OD on the spigot, aim for mid-range